Home
Product Catalog
TCP.IP RS232 or RS485 QR code reader
New Proximity Reader
USB,PS2 and RS232 Desktop Reader
PIN keyboard reader,wiegand 26/34 output
Other Accessorie(Cards,locks,power,etc.)
Offline Stand alone Access Control
New Products(RFID reader,time attendance
Electronic Magnetic Lock Bolt
Intercom Wifi Door Bell
2.4G or UHF Long Range Reader
1M middle range reader,125Khz
EM-ID or Mifare Reader
EM or Mifare Proximity Reader
QR code RFID EM or Mifare Reader
Catologue
security exhibition
Documents
News
Contact Us

Product Catalog 

 

Q2000-C Proximity Card + Password Access Control

  • Q2000-C Proximity Card + Password Access Control
  • Q2000-C Proximity Card + Password Access Control
Model No.︰Q2000-C
Brand Name︰Erfid
Country of Origin︰China
Unit Price︰-
Minimum Order︰-
Share on:

 Total 31 Related Items 
Prev1920212223Next

Product Description

Q2000-C/M Single Door Access Control, Support EM-ID/Mifare or Password Mode

 

 

Build-in access controller and Digital keyboard Manage

Operating Mode: Proximity Card Or password OR Card + Password

Specification

Supply Voltage: DC12V

Working Current: less than 1000 mA

Static current: less than 80 mA

User capacity: 200/800 Card and 200 passwords

Proximity distance: more than 5CM

Support Card type: EM-ID (125 KHz) or Mifare Card

Operation Temperature: -10 C-70 C

Operation Humidity: 10%-90%

 

Program Method

1. Proximity Card AND password Opening Door Mode.

*Press Key # four times, the Buzzer make long sound BI, POWER (Red), OK (Green), Mode (Yellow) is on at the same time.

*Input 5 digits PIN (Default Password is 12345), OK (Green) is off. The machine enters Making Program Status.

*Press key 2, MODE light (Yellow) is on, POWER (Red) and OK (Green) light are off.

*Input 4 character password to open a door (Such as: 0008), the POWER (Red) and OK light (Green) flash.

*Read the user card that needs log in, a sound BI will be heard, POWER light (Red) is off, OK (Green) and MODE light (Orange) are on, the user card is registered successfully.

*Input 4 digits PIN for opening the door, OK (Green) is off, POWER (Red) is on, which showing PIN is registered.

*Press key 7, MODE (Yellow) and POWER light (Red) are bright, OK light (Green) is off.

*Press key 1, a short sound BI will be heard, MODE light is bright, which shows setting is successful.

*Press Key 6 to Exit programming status.

 Opening Door Note: First punching the card, and then input the password in 30 seconds.

 2. Proximity Card OR password Opening Door Mode.

*Press Key # four times, the Buzzer makes long sound BI, POWER: (Red), OK (Green), Mode (Yellow) is on at the same time.

*Input 5 digits PIN (Default Password is 12345), OK (Green) is off. The machine enters Making Program Status.

*Press key 2, MODE light (Yellow) is on, POWER (Red) and OK (Green) light are off.

*Input 4 character password to open a door (Such as: 0008), the POWER (Red) and OK light (Green) flash.

*Read the user card that needs log in, a sound BI will be heard, POWER light (Red) is off, OK(Green) and MODE light (Orange) are on, the user card is registered successfully.

*Input 4 digits PIN for opening the door, OK (Green) is off, POWER (Red) is on, which showing PIN is registered.

*Press key 7, MODE (Yellow) and POWER light (Red) are bright, OK light (Green) is off.

*Press any key except key 1, the Buzzer make a short sound BI.MODE light (Yellow) is bright; the setting for access control is card or password for opening a door.

*Press Key 6 to Exit programming status.

Other Setting:

*Change Program Operating Password

*Press key 1, The MODE (Yellow) light is on, POWER (Red), OK (Green) light is off.

*Input PIN as your will (Example, 23456), the Buzzer make a short sound of BI, OK (Green) is on, POWER (Red), MODE (yellow) is on, PIN has changed successfully.  Note: The PIN should be kept; you will need it to enter the Making Program Mode next time. If PIN forgotten, please execute Machine Initial Step.

Delete the single user card and password

*Press key 3, MODE light (yellow) is bright, POWER (Red) and OK (green) light are off.

*Input 4 character user series No that needs to be deleted. (Series No on card, such as: 0008), a sound BI will be heard. This means the deletion is successful.

*Delete all registered cards and passwords in the machine

 *Press key 4, BI will be heard twice. All the registered cards and passwords are deleted.

 

Open Door Time Setting

 *Press key 5, MODE light (Yellow) is bright, POWER (Red) and OK (Green) are off.

*Input 2 character as the door open time (Such as: 05, means that the door open time is 5 second), sound BI will be heard twice, this means the door open time setup is successful.

 Note: The default open time is 3 second



Product Image



Related Products
metal touch keypad waterproof anti alarm access control
metal touch keypad waterproof anti alarm access control
Metal touch access control ET2
Metal touch access control ET2
Metal IP65 touch access control or RFID reader
Metal IP65 touch access control or RFID reader
Metal Digital backlit touch keypad access control or RFID reader
Metal Digital backlit touch keypad access control or RFID reader

Home  |  Product Catalog  |  Catologue  |  security exhibition  |  Documents  |  News  |  Contact Us  |  Sitemap  |  Mobile Version
  English     简体版     繁體版